countertops

High-quality processing with three-layer chipboard and a plastic laminate coating

Nobilia worktops are characterized above all by their high utility. The worktops consist of high-quality three-layer chipboard, which is coated with resistant plastic laminate panels, so-called HPL and CPL surfaces. The lateral cut edges are also coated with decorative edges at the factory. The butt joints are made with waterproof D3 glue (PVAC). In addition, all worktops are supplied with a 9 meter long APL sealing tape for worktop cut-outs. Also, the sealing tape is applied where the dishwasher is located to insulate the countertop. Nobilia worktops have a standard thickness of 38mm. The usable depth is 600mm as standard and can be extended up to 1170mm, or 1200mm with an N-edge.

Resistant to heat, moisture and scratches

The surfaces of the nobilia worktops are tough. The worktop surface also complies with DIN standard 68930 in terms of scratch and abrasion resistance. This guarantees that the surfaces can withstand normal household stresses.

The edges are also water and scratch resistant

With all nobilia worktops, the laminate is coated around the rounded front edge. The sides of the panel can be finished with a decorative edge. The edges with the decor edge (D-edge) are made with a 1.5 mm thick PP plastic edge band in any worktop decor or the eight Color Concept colors. The 90° outside corners are manufactured in a square shape. A rounded version with an outer radius of 20mm is also available at no extra cost. The inner corners always have a radius of 30mm. The PP edges are glued with waterproof PUR glue.

An N-edge is additionally sealed on the underside

Alternatively, lateral processing can be performed with an inserted N-edge. The N-edge entails an additional price, because the N-edge is sealed at the transition to the underside.

Slimline worktops

Slim Line worktops are elegant and stable

In addition to the 38mm thick worktops, Nobilia also offers Slim Line worktops with a thickness of 16mm. The narrow worktops look particularly elegant and are almost as stable as the standard worktops.
Slim Line panels consist of high-density fiberboard (HDF) and are coated on both sides with a high-quality laminate. The surface of the Slim Line worktop consists of HPL and CPL surfaces, which have a particularly high level of utility. The peripheral decorative edge is 1.2mm thick. A maximum width of 3400mm is possible with the nobilia Slim Line worktops. When planning the kitchen, you should also know that the Slim Line worktops are only available in square worktop shapes. Bevels, notches, roundings and cut-outs are not possible with the Slim Line worktop.

Xtra worktops

Xtra worktops have an exceptional three-dimensional surface structure

Nobilia also offers the Xtra worktops, which are available in selected decors. The Xtra worktops convince many kitchen buyers on the one hand with the particularly distinctive three-dimensional surface structure and on the other hand with the swelling-resistant and impact-resistant surface. The 3D surface of the nobilia Xtra worktops is achieved using a special, strong laminate that is 1.2mm thick instead of 0.8mm. This creates an authentic optical replica of natural stone and wood. Otherwise, the Xtra worktops offer all the advantages of the conventional nobilia worktops.

Flush installation that convinces

However, the Xtra panels not only have an extraordinary look, but also have the advantage of a flush installation of sinks or hobs thanks to the innovative multi-layer structure. Underneath the extra-strong laminate is a 9.4mm thick, innovative functional layer that significantly increases the panel's water resistance. This special layer prevents water from penetrating the plate from above. This means that the worktop cannot swell up. Suitable cut-outs for flush installation can be made at the factory at an additional cost.

Particularly robust thanks to an innovative wear layer

In addition to the fact that the Xtra worktop is less sensitive to water than a conventional worktop, the nobilia Xtra worktop is exceptionally robust. This is also ensured by the innovative wear layer. In addition, the panels are coated as standard with an antibacterial mircoPLUS surface. The nobilia Xtra worktops are available up to a length of 4000mm. The edging is produced as standard in decorative edging (D edging).

Xtra Ceramic work surface

Impact-resistant design edge, scratch-resistant, stable and waterproof

The Xtra Ceramic is an innovative worktop for everyone with high demands on a natural look and quality thanks to the real ceramic layer. The patented Xtra Ceramic plate is manufactured in a composite construction. This means that the 16mm thick worktop is made from 6mm thick ceramic and a 10mm lightweight carrier layer made from recycled glass.

Ideal for high demands in everyday kitchen life

The composite construction of the worktop in combination with an impact-resistant design edge ideally meets all extra requirements in everyday kitchen life. It is also possible to install the hob and sink flush with the surface.
Both the natural and scratch-resistant surface and the water resistance of the worktop make it possible for the Xtra Ceramic worktop to also be used in the bathroom.

quartz stone worktop

Also quite new in the range are the nobilia worktops made of quartz stone in three decors that can be combined in many different ways. The quartz stone worktops impress with their natural look and high level of usability. Even without impregnation, quartz stone is always waterproof. The surface of the nobilia quartz stone worktop is particularly hygienic and easy to care for. Therefore, the panels are not only suitable for kitchens, but also for bathroom planning. The quartz worktop is available in 12 and 38mm thickness. In addition, the nobilia quartz stone worktops can also be installed flush, analogous to the Xtra worktop.

cheek system

Nobilia side panel systems are available in around 100 decors and in widths of 10 mm, 16 mm, 25 mm and 50 mm. The range of types that can be delivered depends on the material thickness: side panels, shelves, top shelves, base and cornice shelves. The exact side panel height supplied is the result of the body height plus the base height, minus 8 mm for the side panel. The cheek shoe is available in 010 black and 014 stainless steel look.